Kasco-marine LED6125 User Manual

Owners ManualSubmersible Light KitsModels LED3125 & LED6125ContentsImportant Safety. . . . pg2General Instructions. . . . pg2Parts Included. . .

10800 Deere Rd.Prescott, WI 54021Phone: 715-262-4488 - Fax: 715-262-4487www.KascoMarine.com [email protected] Repair Form* Important

11

12Registration InformationFill in the information below and keep for your records.Model # (Ex. LED3125)_______________________________Serial # (Ex. 21

2THANKSWe at Kasco Marine, Inc. would like to both thank and congratulate you on your purchase of the Submersible LED Light Kit. This kit will illumi

33. Place rubber caps over the light xtures as shown. Ensure the rubber cap is seated all the way down onto the xture housing. If this is not on a

4Fig 8 9. Upon installation of the assembled unit, connect your LED light kit to your eld installed GFCI pro-tected outlet and timer.Note:Installati

5Fig 11 Check for orange oringFig 12 9. Upon installation of the assembled unit, connect your LED light kit to your eld installed GFCI pro-tecte

6can also alert you to electrical leaks in the equipment. If you have repeat, consistent trips of the ground fault device, the equipment should be di

7Any expedited shipping method for the return of the unit is at the customer’s expense. Kasco Marine will return units repaired under warranty at our

8Troubleshooting TipsTroubleshooting tips - light kitProblem Possible CauseLikely RemedyPower is off or disconnectedEnsure control panel is connected

914FLOAT MOUNTING (2HP & LARGER)ITEMS 8-12 REQUIRED FOR LARGE12345 711891012136OF 5 DIFFERENT COLORSKIT CONTAINS 4 EACHITEMS 7-10 REQUIRED FOR SMA